H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 53)

40
Table 9 Field description
Field Description
Time/Date Displays the time/date when system logs are generated.
Source Displays the module that generates system logs.
Level
Displays the severity level of system logs. For the detailed description of the severity
levels, see
Table 10 .
Digest Displays the brief description of system logs
Description Displays the contents of system logs.
Table 10 System logs severity level
Severity level Description Value
Emergency The system is unavailable. 0
Alert Information that demands prompt reaction 1
Critical Critical information 2
Error Error information 3
Warning Warnings 4
Notification Normal information that needs to be noticed 5
Informational Informational information to be recorded 6
Debugging Information generated during debugging 7
Note: A smaller value represents a higher severity level.
Setting the log host
You can set the loghost on the web interface to enable the system to output syslogs to the log host. You
can specify at most four different log hosts.
To set the log host:
1. Select Device > Syslog from the navigation tree.
2. Click the Loghost tab.
The loghost configuration page appears.