Display the information of assigned ip addresses, Configuring the dhcp relay agent, Recommended configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 269: Shown in, Figure 228
256
Figure 228 Configure a DHCP server interface
Display the information of assigned IP addresses
1.
Select Network > DHCP to enter the default DHCP Server page shown in
.
2.
In the Address In Use area, view the information about the IP address assigned from the address
pool.
Table 78 Field description
Field Description
IP Address
Assigned IP address
Client MAC Address/Client ID
Client MAC address or client ID bound to the IP address
Pool Name
Name of the DHCP address pool where the IP address belongs
Lease Expiration
Lease time of the IP address
Configuring the DHCP relay agent
Recommended configuration procedure
Step Remarks
Required
Enable DHCP globally and configure advanced DHCP parameters.
By default, global DHCP is disabled.
Required
To improve reliability, you can specify several DHCP servers as a group on the
DHCP relay agent and correlate a relay agent interface with the server group.
When the interface receives requesting messages from clients, the relay agent will
forward them to all the DHCP servers of the group.