Viewing port operation parameters, Viewing an operation parameter of all ports – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 66

Text mode
Original mode

Item Description

Selected Ports

Interface or interfaces that you have selected from the chassis front panel and the
aggregate interface list below, for which you have set operation parameters

IMPORTANT:

You can set only the state and MAC learning limit for an aggregate interface.

Viewing port operation parameters

Viewing an operation parameter of all ports

Select Device > Port Management from the navigation tree.
The Summary tab appears.

Select the parameter you want to view by clicking the radio button before it.
The lower part of the page displays the setting of this parameter for all the ports.

Figure 39 The Summary tab