H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 410)

397
Step Remarks
3. Configuring a rule for a basic IPv4 ACL
Required
Complete one of the following tasks according to the
ACL category.
4. Configuring a rule for an advanced IPv4 ACL
5. Configuring a rule for an Ethernet frame header
ACL
Recommended IPv6 ACL configuration procedure
Step Remarks
1. Configuring a time range
Optional
Create a time range. A rule referencing a time range
takes effect only during the specified time range.
2. Creating an IPv6 ACL
Required
Create an IPv6 ACL. The category of the created IPv6
ACL depends on the ACL number that you specify.
3. Configuring a rule for a basic IPv6 ACL Required
Complete one of the tasks according to the ACL
category.
4. Configuring a rule for an advanced IPv6 ACL
Configuring a time range
1. Select QoS > Time Range from the navigation tree.
2. Click the Create tab to enter the time range creating page.
Figure 393 The page for creating a time range