H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 435)

422
Figure 408 The page for applying a policy to the specified ports
3. Select a policy and apply the policy to the specified ports.
4. Click Apply.
Table 127 Configuration items
Item Description
Please select a policy Select an existing policy in the list.
Direction
Set the direction in which the policy is to be applied.
• Inbound: Applies the policy to the incoming packets of the specified ports.
• Outbound: Applies the policy to the outgoing packets of the specified ports.
Please select port(s)
Click to select ports to which the QoS policy is to be applied on the chassis front
panel.
Configuring queue scheduling on a port
1. Select QoS > Queue from the navigation tree.
2. Click Setup to enter the queue scheduling configuration page, as shown in Figure 409 .