H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 229)

216
Item Description
Send gratuitous ARP packets when
receiving ARP requests from another
network segment
Enable the device to send gratuitous ARP packets upon receiving ARP
requests from another network segment.
Disabled by default.
Static ARP configuration example
Network requirements
As shown in Figure 192 , hosts are connected to Switch A, which is connected to Router B through
interface GigabitEthernet 1/0/1 belonging to VLAN 100. The IP address of Router B is 192.168.1.1/24.
The MAC address of Router B is 00e0-fc01-0000.
To enhance communication security between Switch A and Router B, static ARP entries need to be
configured on Switch A.
Figure 192 Network diagram
Configuration procedure
1. Create VLAN 100:
a. Select Network > VLAN from the navigation tree.
b. Click the Add tab.
c. Type 100 for VLAN ID, as shown in Figure 193 .
d. Click Create.