H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 15)

2
Figure 2 System parameter configuration page
Table 1 Configuration items
Item Description
Sysname
Specify the system name.
The system name appears at the top of the navigation tree.
You can also set the system name on the System Name page you enter by selecting
Device > Basic. For more information, see the chapter " Device basic information
configuration ."
Syslocation
Specify the physical location of the system.
You can also set the physical location on the page you enter by selecting Device >
SNMP. For more information, see the chapter
"SNMP configuration ."
Syscontact
Set the contact information for users to get in touch with the device vendor for help.
You can also set the contact information on the page you enter by selecting Device >
SNMP. For more information, see the chapter
"SNMP configuration ."
Configuring the management IP address
CAUTION:
Modifying the management IP address used for the current login terminates the connection to the device.
Use the new management IP address to log in to the system again.
After finishing the configuration, click Next to enter the management IP address configuration page.