Web user level, Introduction to the web-based nm functions – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 24
11
Figure 10 Web-based configuration interface
(1) Navigation tree
(2) Body area
(3) Title area
•
Navigation tree—Organizes the web-based NM functions as a navigation tree, where you can
select and configure functions as needed. The result is displayed in the body area.
•
Body area—Allows you to configure and display features.
•
Title area—On the left, displays the path of the current configuration interface in the navigation
area; on the right, provides the Save button to quickly save the current configuration, the Help button
to display the web related help information, and the Logout button to log out of the web interface
Web user level
Web user levels, from low to high, are visitor, monitor, configure, and management. A user with a
higher level has all the operating rights of a user with a lower level.
•
Visitor—Users of this level can use the network diagnostic tools ping and Trace Route, but they can
neither access the device data nor configure the device.
•
Monitor—Users of this level can only access the device data but cannot configure the device.
•
Configure—Users of this level can access device data and configure the device, but they cannot
upgrade the host software, add/delete/modify users, or back up/restore configuration files.
•
Management—Users of this level can perform any operations to the device.
Introduction to the web-based NM functions
NOTE:
User level in
indicates that users of this level or users of a higher level can perform the
corresponding operations.