H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 115)

102
Figure 82 Create an SNMP view (1)
4. Enter the view name.
5. Click Apply.
The page in
Figure 83 appears.
Figure 83 Create an SNMP view (2)
6. Configure the parameters as described in Table 34 .
7. Click Add.
8. Repeat steps 6 and 7 to add more rules for the SNMP view.
9. Click Apply.
To cancel the view, click Cancel.
Table 34 Configuration items
Item Description
View Name Set the SNMP view name.
Rule
Select to exclude or include the objects in the view range determined by the MIB
subtree OID and subtree mask.
MIB Subtree OID
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system).
MIB subtree OID identifies the position of a node in the MIB tree, and it can uniquely
identify a MIB subtree.
Subtree Mask
Set the subtree mask.
If no subtree mask is specified, the default subtree mask (all Fs) will be used for
mask-OID matching.