Configuring basic settings – H3C Technologies H3C MSR 5600 User Manual
Page 82
72
Figure 29 Network diagram
Configuring basic settings
1.
Configure Router A:
# Configure a timeslot set using R2 signaling for controller E1 1/1.
[RouterA] controller e1 1/1
[RouterA-E1 1/1] timeslot-set 0 timeslot-list 1-31 signal r2
[RouterA-E1 1/1] quit
[RouterA] voice-setup
[RouterA-voice] dial-program
# Configure a match template to match 010….$ for POTS entity 1001 and bind line 1/1:0 to the
entity.
[RouterA-voice-dial] entity 1001 pots
[RouterA-voice-dial-entity1001] match-template 010....$
[RouterA-voice-dial-entity1001] line 1/1:0
# Configure a local number 2000 for POTS entity 2000, and bind line3/0 to the entity.
[RouterA-voice-dial] entity 2000 pots
[RouterA-voice-dial-entity2000] match-template 2000
[RouterA-voice-dial-entity2000] line 3/0
2.
Configure Router B:
# Configure a timeslot set using R2 signaling for controller E1 1/1.
[RouterB] controller e1 1/1
[RouterB-E1 1/1] timeslot-set 0 timeslot-list 1-31 signal r2
[RouterB-E1 1/1] quit
# Configure a local number 1001 for POTS entity 1002, and bind line 3/0 to the entity.
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 1002 pots
[RouterB-voice-dial-entity1002] match-template 01001
[RouterB-voice-dial-entity1002] line 3/0
[RouterB-voice-dial-entity1002] quit
# Configure a local number 0101001 for POTS entity 0101001, and bind line 3/1 to the entity.
[RouterB-voice-dial] entity 0101001 pots
Router A
Router B
Eth2/1
1.1.1.1/24
Eth2/1
1.1.1.2/24
E1 1/1
2000
1001
0101001
Telephone A
Telephone B
Telephone C
Telephone D
01001
E1 1/1
FXS 3/0
FXS 3/0
FXS 3/1
FXS 3/2