Configuring call forwarding, Call services configuration examples, Call waiting configuration example – H3C Technologies H3C MSR 5600 User Manual
Page 115: Network requirements
105
Step Command
Remarks
3.
Configure the call hold mode. call-hold-format { inactive |
sendonly [ moh-number string ] }
The default is inactive.
Configuring call forwarding
Before configuring call forwarding, make sure there is a route from the initiator to the final recipient.
You need to correctly plan forwarded-to numbers to avoid incorrect numbers and circular calls.
A call can be forwarded five times at most.
To configure call forwarding:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter voice dial program view. dial-program
N/A
3.
Create a POTS entity and
enter POTS entity view.
entity entity-number pots
N/A
4.
Configure call forwarding.
call-forwarding { no-reply |
on-busy | unavailable |
unconditional } number number
By default, call forwarding is
disabled.
The unconditional, unavailable,
on-busy, and no-reply call
forwarding types can be
configured at the same time and
have a descending order of
priority.
Call services configuration examples
This section provides call services configuration examples.
Call waiting configuration example
Network requirements
As shown in
, configure call waiting so when a user places a call from Telephone C to
Telephone A that is in a conversation with Telephone B, the subscriber at Telephone C hears ringback
tones, and the subscriber at Telephone A hears call waiting tones.