Configuring codecs for a pots entity, Required.) – H3C Technologies H3C MSR 5600 User Manual
Page 63
53
Creating a POTS entity and configuring basic parameters
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter voice view.
voice-setup
N/A
3.
Enter dial program view.
dial-program
N/A
4.
Create a POTS entity and enter
POTS entity view.
entity entity-number pots
By default, no POTS voice
entities exist.
5.
(Optional.) Configure a description
for the POTS entity.
description string
By default, no description is
configured.
6.
Configure a number template for
the POTS entity.
match-template match-string
By default, no number template
is configured for the POTS
entity.
The POTS entity uses the number
template to match phone
numbers. For example, the
match-template 20 command
matches all numbers beginning
with 20.
7.
Bind a voice interface to the POTS
entity.
line line-number
By default, no voice interface is
bound to the POTS entity.
8.
Enable the POTS entity.
undo shutdown
By default, a POTS entity is
enabled.
Configuring codecs for a POTS entity
By default, a POTS entity has four codecs g729r8, g711alaw, g711ulaw, and g723r53 in descending
order of priority.
You can use one of the following methods to configure codecs for a POTS entity:
•
Method 1: Configure codecs for a POTS entity.
•
Method 2: Create a codec template, assign priorities to codecs in the codec template, and bind the
codec template to a POTS entity.
Two parties must have the same codecs to communicate with each other. You can use the display voice
sip call command (see Voice Command Reference) to view the codec used by two parties.
To configure codecs for a POTS entity (method 1):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter voice view.
voice-setup
N/A
3.
Enter dial program view.
dial-program
N/A
4.
Create a POTS entity and
enter POTS entity view.
entity entity-number pots N/A