H3C Technologies H3C MSR 5600 User Manual
Page 64
54
Step Command
Remarks
5.
Configure a codec for the
POTS entity.
codec { g711alaw | g711ulaw |
g723r53 | g723r63 | g726r16 |
g726r24 | g726r32 | g726r40 |
g729a | g729br8 | g729r8 }
[ bytes payload-size ]
By default, no codecs are
configured.
To configure codecs for a POTS entity (method 2):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter voice view.
voice-setup
N/A
3.
Create a codec template.
voice class codec tag
By default, no codec templates
exist.
4.
Assign a priority to a codec in
the codec template.
codec preference priority
{ g711alaw | g711ulaw |
g723r53 | g723r63 | g726r16 |
g726r24 | g726r32 | g726r40 |
g729a | g729br8 | g729r8 }
[ bytes payload-size ]
By default, no codecs exist in a
template.
Repeat this command to assign
priorities to more codecs.
5.
Return to voice view.
quit
N/A
6.
Enter dial program view.
dial-program
N/A
7.
Create a POTS entity and
enter POTS entity view.
entity entity-number pots N/A
8.
Bind the codec template to the
POTS entity.
voice-class codec tag
By default, the binding does not
exist.
Configuring a POTS entity to register with the registrar
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter voice view.
voice-setup
N/A
3.
Enter dial program view.
dial-program
N/A
4.
Create a POTS entity and
enter POTS entity view.
entity entity-number pots N/A
5.
Configure the POTS entity to
register with the registrar
server.
register number
By default, a POTS entity initiates a
registration to the registrar server
after the SIP registration
configuration is complete.
If you do not want to register a
number or you want to deregister a
number from the registrar server,
you can use the undo register
number command.