Configuring dial programs, Configuration task list, Configuring caller control – H3C Technologies H3C MSR 5600 User Manual
Page 71: Procedure
61
Configuring dial programs
This chapter describes using dial programs to define call control policies such as caller control, number
substitution, call sending, and number match policies.
Configuration task list
Tasks at a glance
(Optional.)
(Optional.)
Configuring caller group control
(Optional.)
Enabling private line auto ring-down
(Optional.)
Configuring a number match mode
(Optional.)
Configuring the maximum number of total calls allowed by a voice entity
(Optional.)
Configuring number substitution
(Optional.)
Configuring a priority for a voice entity
(Optional.)
Configuring a number sending mode
(Optional.)
Configuring caller control
Caller control allows you to filter outgoing calls on the calling side or filter incoming calls on the called
side based on calling numbers.
Procedure
To configure caller control:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter voice view.
voice-setup
N/A
3.
Enter dial program view.
dial-program
N/A
4.
Create a voice entity and
enter voice entity view.
entity entity-number { pots | voip }
N/A