Examples – H3C Technologies H3C MSR 5600 User Manual
Page 72
62
Step Command
Remarks
5.
Configure permitted calling
numbers.
caller-permit calling-string
By default, the voice entity permits
all calling numbers.
The calling-string argument is in the
format of { [ + ] string [ $ ] }| $. For
details, see Voice Command
Reference.
Examples
As shown in
, configure caller control to permit only the number 1000 to call the number 2000.
Figure 24 Caller control diagram
You can configure caller control either on the calling side or on the called side to meet the requirement.
•
Method 1: Configure the calling side to permit only the calling number 1000 to call the number
2000.
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 2000 voip
[RouterA-voice-dial-entity2000] match-template 2000
[RouterA-voice-dial-entity2000] address sip ip 1.1.1.2
[RouterA-voice-dial-entity2000] caller-permit 1000$
•
Method 2: Configure the called side to permit only the calling number 1000 to call the number
2000.
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 2000 pots
[RouterB-voice-dial-entity2000] match-template 2000
[RouterB-voice-dial-entity2000] caller-permit 1000$
[RouterB-voice-dial-entity2000] line 1/0