Configuration procedure – H3C Technologies H3C MSR 5600 User Manual
Page 58
48
Figure 21 Network diagram
Configuration procedure
1.
Configure Router A:
# Configure the IP address 1.1.1.1/24 for interface GigabitEthernet 0/0.
[RouterA] interface GigabitEthernet 0/0
[RouterA-GigabitEthernet0/0] ip address 1.1.1.1 255.255.255.0
[RouterA-GigabitEthernet0/0] quit
# Bundle the timeslots on interface E1 5/0 into a PRI set.
[RouterA] controller e1 5/0
[RouterA-E1 5/0] pri-set
[RouterA-E1 5/0] quit
# Configure the local number 0101001 for POTS entity 1001, and bind the digital voice
interfaces line 5/0:15 to the POTS entity.
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 1001 pots
[RouterA-voice-dial-entity1001] match-template 0101001
[RouterA-voice-dial-entity1001] line 5/0:15
[RouterA-voice-dial-entity1001] send-number all
[RouterA-voice-dial-entity1001] quit
# Configure the local number 0101002 for POTS entity 1002, and bind the digital voice
interfaces line 5/0:15 to the POTS voice entity.
[RouterA-voice-dial] entity 1002 pots
[RouterA-voice-dial-entity1002] match-template 0101002
[RouterA-voice-dial-entity1002] line 5/0:15
[RouterA-voice-dial-entity1002] send-number all
[RouterA-voice-dial-entity1002] quit
# Configure the called number template 0755…. for VoIP entity 0755, and configure the
destination IP address as 2.2.2.2.
[RouterA-voice-dial] entity 0755 voip
[RouterA-voice-dial-entity755] match-template 0755....
[RouterA-voice-dial-entity755] address ip 2.2.2.2
2.
Configure Router B:
# Configure the IP address 2.2.2.2/24 for interface GigabitEthernet 0/0.