H3C Technologies H3C S10500 Series Switches - Manual (Page 75)

60
NSSA area
Similar to a stub area, an NSSA area does not import AS external LSAs (Type-5 LSAs), but can import
Type-7 LSAs generated by the NSSA ASBR. The NSSA ABR translates Type-7 LSAs into Type-5 LSAs and
advertises the Type-5 LSAs to other areas.
In the following figure, the OSPF AS contains Area 1, Area 2, and Area 0. The other two ASs run RIP.
Area 1 is an NSSA area. The ASBR redistributes RIP routes in Type-7 LSAs into Area 1. Upon receiving
these Type-7 LSAs, the NSSA ABR translates them to Type-5 LSAs, and then advertises the Type-5 LSAs to
Area 0.
The ASBR of Area 2 redistributes RIP routes in Type-5 LSAs into the OSPF routing domain. However, Area
1 does not receive these Type-5 LSAs because it is an NSSA area.
Virtual links cannot transit NSSA areas.
Figure 20 NSSA area
Comparison between the areas
Figure 21 Comparison between the areas
Figure 21 shows the comparison of the areas:
• In a totally stub area, the ABR distributes a Type 3 default route, rather than external routes and
inter-area routes.
• A stub area can import inter-area routes, but a stub area cannot.
• An NSSA area can import external routes in Type 7 LSAs through the ASBR, but a stub area cannot.
• A totally NSSA area cannot import inter-area routes but an NSSA area can.