ARAG Bravo 400S Seletron - Manual (Page 84)

84
"HOME" MENU - F4 MEMORIES MANAGEMENT > USB PENDRIVE
14.4.3 USB pendrive
It allows transferring the saved data (Fig. 288) from the pendrive onto the internal memory of Bravo 400S.
The following paragraphs will use
Implements as an example: the same procedure will be valid for all other cases ( Tractors , Users , etc., Fig. 288).

1
1 Press F4 to enter Memories management .
2 Select the USB 1 pendrive menu and press OK .
3 Select Implements (Fig. 288) and press OK .
4 In the list of memorized names select the desired implement (Fig. 289) and press OK .
A list of actions that can be performed for the selected implement will appear ( Delete etc., Fig. 289). These will be described below.
The option [Select all... ] allows performing the same operation simultaneously on ALL implements of the list,
EXCEPT THE ACTIVE ONE.

2
Fig. 287

3
Fig. 288

4
Fig. 289
• Delete

Fig. 290

Fig. 291
Allows to delete data from the pendrive.
- Select Delete (Fig. 290) and press OK .
- The message in Fig. 291 is displayed: confirm
deletion by pressing
OK again.
• Copy to internal memory

Fig. 292
Allows to copy data from the pendrive onto Bravo 400S internal memory.
- Select the item
Copy to internal memory (Fig. 292) and press OK .
ERROR MESSAGES
Fig. 293
ERROR 1: a file with the same name already exists on the internal
memory.
ERROR 2: a file with the same name already exists on the internal
memory and it is being used.
- Press OK to replace the file (all data in the replaced file will be
lost).
- Press
ESC to avoid replacing the file (check its contents or edit its
name before trying to save again).
Fig. 294
CONTINUES
Par.
7.4
Exit the function or
data change Confirm access
or data change Scroll
(LEFT / RIGHT)
Delete
selected
character Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character