ARAG Bravo 400S Seletron - Manual (Page 115)

115
TECHNICAL DATA
Menu Data Min. Max. UoM DEFAULT Other values that can be set / Notes
Working
parameters
Spraying limits
Spraying speed limit -- -- -- Disabled Enabled
Minimum spraying speed
0.4 99.9 km/h 1.0 km/h
0.2 99.9 mph 0.6 mph
Regulation pressure limit -- -- -- Disabled Enabled
Minimum regulation pressure
0.1 99.9 bar 1.0 bar
1 1449 PSI 15 PSI
Flowrate correction factor 0.25 4.00 -- 1.00
Level correction factor
0.25 4.00 kg/l 1.00 kg/l
33.38 534.11 oz/gal 133.53 oz/gal
Automatic section
control
Sections overlapping limit 0 100 % 100 %
Perimeter overlapping limit 0 100 % 0 %
Spray closing delay
0.0 5.0 m 0.0 m
0.00 16.00 ft 0.00 ft
Spray closing advance
0.0 5.0 m 0.0 m
0.00 16.00 ft 0.00 ft
Guidance
Steering radius
0.0 20.0 m 0.0 m
0.00 65.00 ft 0.00 ft
Reference lines distance
offset -100.00 100.00 m +000.00 m
-328.08 328.08 ft +000.00 ft
Geometry
settings
Implement upper view
Distance between
connection point and hitch
point
0.00 20.00 m 1.50 m
System with 3-point hitch, selected during guided setup
0.00 64.00 ft 4.92 ft
Offset between connection
point and hitch point -20.00 20.00 m 0.00 m
-64.00 64.00 ft 0.00 ft
Implement rear view Implement width
0.50 90.00 m 20.00 m
0.50 290.00 ft 65.62 ft
Implement upper view
Distance between
implement's rear axle and
the application point 0.00 20.00 m 1.50 m
System with Towing hitch, selected during guided setup
0.00 64.00 ft 4.92 ft
Distance between
connection point and
implement's rear axle 0.00 20.00 m 5.00 m
0.00 64.00 ft 16.40 ft
Distance between tractor's
wheels 0.50 5.00 m 1.80 m
0.50 15.00 ft 5.91 ft
Offset between connection
point and hitch point
-20.00 20.00 m 0.00 m
-64.00 64.00 ft 0.00 ft
Implement rear view Implement width
0.50 90.00 m 20.00 m
0.50 290.00 ft 65.62 ft
CONTINUES > > >
> > > 18.1 Data and units of measurement shown
Implement