Implement rear view, Advanced settings "implement – ARAG Bravo 400S Seletron User Manual
Page 48
48
END 10.1.15 Towed implement geometry settings (SYSTEM WITH TOWING HITCH)
> > > 10.1.15 Towed implement geometry settings (SYSTEM WITH TOWING HITCH)
ADVANCED SETTINGS
"IMPLEMENT"
*
Fig. 167
Fig. 168
• Implement rear view
- Confirm by pressing
OK
to enter setup.
- Enter the value.
*
Implement width
Implement width
Boom width
(sprayed area)
14.00 m
20.00 m
Fig. 169
The width set for the implement is shown on the display in the guidance screen: usually it is
equal to the boom width, and thus to the covered area diagram.
If you wish to see two different widths displayed on the guidance screen, as in the example
of Fig. 169, set the
Implement width
to a different value than the boom width
(par. 10.1.2).
Par.
Exit the function or
data change
Confirm access
or data change
Scroll
(LEFT / RIGHT)
Delete
selected
character
Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character