ARAG Bravo 400S Seletron - Manual (Page 26)

26
ADVANCED SETTINGS "IMPLEMENT"
Fig. 71
• Section 1 ÷ 13
- Indicate the number of spraying points (nozzle holders) installed on each boom section.
- Repeat the setup for each section (Fig. 65).
SECTION MANAGEMENT
Fig. 72
• Activation status of the sections
It allows to enable/disable specific boom sections.
(
Section enabled / Section disabled).
- Select the section you wish to set up.
- Repeat the setup for each section (Fig. 72), by disabling the disconnected outputs.
Par.
7.4
Exit the function or
data change Confirm access
or data change Scroll
(LEFT / RIGHT)
Delete
selected
character Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character