ARAG Bravo 400S Seletron - Manual (Page 31)

31
SECTION VALVES
Fig. 88
• Type (REMINDER)
On a Seletron system, section valves are of the 2-way type (without calibrated backflows) and are
automatically set.
Fig. 89
• Shut-off time
Indicate the time between the moment when the command is sent to the Seletron valves and the actual
moment in which product output stops.
Fig. 90
• Switch-on time
Indicate the time between the moment when the command is sent to the Seletron valves and the actual
moment in which product output starts.
> > > 10.1.6 Valves
END 10.1.6 Valves
ADVANCED SETTINGS "IMPLEMENT"
Par.
7.4
Exit the function or
data change Confirm access
or data change Scroll
(LEFT / RIGHT)
Delete
selected
character Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character