ARAG Bravo 400S Seletron - Manual (Page 47)

47
ADVANCED SETTINGS "IMPLEMENT"
The geometry of the displayed implement depends on the selected basic settings (chap. 9).
10.1.15 Towed implement geometry settings (SYSTEM WITH TOWING HITCH)
Fig. 162
Enter farming machine measures:
- Press the arrow keys (UP, DOWN, LEFT, RIGHT) to move across different implement views.
- Confirm by pressing
OK to enter setup.
Fig. 163 Fig. 164
• Implement upper view
- Press the arrow keys (UP, DOWN, LEFT,
RIGHT) to move across values: the description
of the selected value will appear on the display.
- Confirm by pressing
OK to enter setup.
- Enter the value.
- Select and enter, one by one, all values.
* Offset between connection point and application point
Application point Connection point
- 1.50 m
NEGATIVE VALUES:
the application point is
to the left of the
connection point.

Fig. 165
Application point Connection point
+ 1.50 m
POSITIVE VALUES:
the application point is to the
right of the connection point.

Fig. 166
CONTINUES > > >
Par.
7.4
Exit the function or
data change Confirm access
or data change Scroll
(LEFT / RIGHT)
Delete
selected
character Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character