Reserve level, Tank profile, Advanced settings "implement – ARAG Bravo 400S Seletron User Manual
Page 35
35
ADVANCED SETTINGS
"IMPLEMENT"
TANK LEVEL SOURCE: LEVEL SENSOR
Fig. 106
• Reserve level
Indicate range value.
The tank alarm is triggered when, during spraying, the tank level falls below the set value.
For the procedure to be followed when an alarm occurs, please refer to par. 17.1 Error messages.
Fig. 107
• Tank profile
The tank profiles can be loaded or saved on the internal memory so as to reconfigure the computer if
necessary, solve problems or configure another tank without repeating all operations manually.
In this menu, indicate the current tank profile.
The profiles are ONLY available if copied onto the internal memory (par. 14.4.2), or after calibrating
the tank profile (par. 10.1.13).
After loading a tank profile it is NECESSARY to perform a zero calibration of the level sensor (
Tank
zero value
, par. 10.1.13).
Par.
Exit the function or
data change
Confirm access
or data change
Scroll
(LEFT / RIGHT)
Delete
selected
character
Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character