ARAG Bravo 400S Seletron - Manual (Page 61)

61
SELETRON REPLACEMENT
11.1 Preliminary Operations
TO AVOID ACCIDENTS, EMPTY THE TANK AND MAKE SURE THAT THE ENTIRE SYSTEM IS COMPLETELY FREE
FROM CHEMICALS.
IMPORTANT: Set the main switch and section switch to ON. Enable all nozzles and disable all automatic functions par.
"13 Automatic functions" on page 69.
Main
control ON
+
Open
sections
+
Enabled
nozzles
+
MANUAL nozzle
selection settings
+
MANUAL section
management settings
11.2 Seletron replacement
Fig. 218
Correctly paired Seletron NOT correctly paired Seletron
- ONLY DISCONNECT THE SELETRON DEVICES THAT WERE NOT CORRECTLY PAIRED ( Fig. 218).
CONTINUES > > >
ADVANCED SETUP "DEVICE STATUS"