8 camera, 9 tractor geometry settings, Tractor upper view – ARAG Bravo 400S Seletron User Manual
Page 51: 8 camera 10.2.9 tractor geometry settings, Advanced setup "tractor, Connection point
51
ADVANCED SETUP
"TRACTOR"
10.2.8 Camera
Fig. 181
It is possible to connect up to 2 cameras to Bravo 400S in order to monitor the working areas that the operator
is unable to see (e.g., when driving in reverse).
From the menu it is possible to enable/disable each single camera individually or both cameras:
No camera connected
1 camera connected to input no. 1
1 camera connected to input no. 2
2 cameras connected
10.2.9 Tractor geometry settings
Fig. 182
Enter farming machine measures:
- Press the arrow keys (UP, DOWN, LEFT, RIGHT) to move across different tractor views.
- Confirm by pressing
OK
to enter setup.
Fig. 183
Fig. 184
• Tractor upper view
- Press the arrow keys (UP, DOWN, LEFT,
RIGHT) to move across values: the description
of the selected value will appear on the display.
- Confirm by pressing
OK
to enter setup.
- Enter the value.
- Select and enter, one by one, all values.
Connection point
Fig. 185
THE CONNECTION POINT OF A
SELF-PROPELLED MACHINE
COINCIDES WITH THE REAR AXLE OF THE
VEHICLE.
Par.
Exit the function or
data change
Confirm access
or data change
Scroll
(LEFT / RIGHT)
Delete
selected
character
Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character