ARAG Bravo 400S Seletron - Manual (Page 45)

45
The geometry of the displayed implement depends on the selected basic settings (chap. 9).
10.1.14 3-point implement geometry settings (SYSTEM WITH REAR / FRONT 3-POINT HITCH)
Fig. 153
Enter farming machine measures:
- Press the arrow keys (UP, DOWN, LEFT, RIGHT) to move across different implement views.
- Confirm by pressing
OK to enter setup.
*
Fig. 154 Fig. 155
• Implement upper view
- Press the arrow keys (UP, DOWN, LEFT,
RIGHT) to move across values: the description
of the selected value will appear on the display.
- Confirm by pressing
OK to enter setup.
- Enter the value.
- Select and enter, one by one, all values.
* Offset between connection point and application point
Application point Connection point
- 1.50 m
NEGATIVE VALUES:
the application point is
to the left of the
connection point.

Fig. 156
Application point Connection point
+ 1.50 m
POSITIVE VALUES:
the application point is to the
right of the
connection point.

Fig. 157
THE CONNECTION POINT OF A SELF-PROPELLED MACHINE COINCIDES WITH THE REAR AXLE OF THE VEHICLE.
Connection point
Application point
Fig. 158
ADVANCED SETTINGS "IMPLEMENT"
CONTINUES > > >
Par.
7.4
Exit the function or
data change Confirm access
or data change Scroll
(LEFT / RIGHT)
Delete
selected
character Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character