ARAG Bravo 400S Seletron - Manual (Page 100)

100
"JOB FUNCTIONS" - STRUCTURE
16 JOB FUNCTIONS
Fig. 340
To access job functions start a job ( New job , Resume job , Continue last job ,
chap. 14 "Home" Menu); in the guidance screen press Func .
When the list is active (Fig. 340), pressing the key will enable the relevant function.
The table below lists all available job functions and the corresponding function keys (unavailable functions are displayed in gray).
Par.
16.1 F1
Target rate
Spray rate change
16.3
F3
Point marking
It groups the marking of more points:
F1 Pause
Job breaking point
saving
F3/F5/F7
General point of
interest saving
16.5 F5
Resume from pause
Guidance indications to return to job breaking point
16.7 F7
New AB
Creation of a new AB track
Par.
16.2 F2
Guidance mode
Guidance mode selection
16.4 F4
Surface
Field surface calculation
16.6 F6
Align
Alignment to nearest track
16.8
F8
Display
Display options
Includes several functions:
F2
Tractor
themes
F4
Spraying
themes
F6
Daytime/
night time
display
mode
F8
2D / 3D
display
mode
Par.
7.4
Exit the function or
data change Confirm access
or data change Scroll
(LEFT / RIGHT)
Delete
selected
character Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character