ARAG Bravo 400S Seletron - Manual (Page 57)

57
The aspect of this menu depends on the selected basic settings (chap. 9), which affect which items are displayed in Fig. 205.
10.5 Device status
Fig. 205
Allows checking the correct operation of Bravo 400S: the description of the selected item will appear on the
display.
Displayed items are READ-ONLY.
SELETRON SYSTEM
• Status of the Seletron system
This menu has two main functions:
• INSTALLATION
Allows to display the progress during Seletron's pairing procedure (chap. 11 Seletron connection).
• DIAGNOSTICS
Allows to check the connection of each single Seletron.
CARRY OUT BOTH PROCEDURES WITH RUNNING ENGINE.
SELETRON CONNECTION DIAGNOSTICS
Color legend:
Correct operation.
Seletron does not respond.
Power supply error on Seletron devices: power voltage lower than the allowed value.
The screen in Fig. 206 shows the corresponding number: select the Seletron device by using the arrow keys (UP, DOWN, RIGHT, LEFT).
Fig. 206
If necessary, you can repeat the pairing procedure for each Seletron device:
BEFORE STARTING A NEW PAIRING PROCEDURE, YOU MUST RESET THE PREVIOUSLY
ALLOCATED IDENTIFICATION NUMBERS.
Use the function Identification numbers reset (par. 10.1.13).
ADVANCED SETUP "DEVICE STATUS"
CONTINUES > > >
Par.
7.4
Exit the function or
data change Confirm access
or data change Scroll
(LEFT / RIGHT)
Delete
selected
character Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character