Westermo ID-90 - Manual (Page 78)

78 6607-2204
Example: mtype command (show all entries)
mtype1: 0 SMS (default)
mtype2: 0SMS
mtype3: 1 Text
mtype4: 0SMS
nui – Nui and password
Setup nui and password sent with an outgoing X.25 call packet.
nui and password has to be entered as ASCII characters.
(X.25 B channel and X.31 D channel only)
opnumber – SMS operator number
This command is used when an alarm message should be transferred as SMS-text.
The ISDN number should be to an operator providing SMS service.
A separate operator number for each alarm input could be defined.
opnumberx nn set entry number x to ISDN number nn.
opnumberx - clear entry number x
opnumberx show entry number x
opnumber show all entries
Maximum number of entries = 4.
Maximum length of ISDN number = 20 digits.
Example: opnumber command (show all entries)
OpNumber1: 04912345678
OpNumber2: 78563798
OpNumber3: 3588
OpNumber4: 04610286745
opwd – Operator password
The operator password is used by some SMS operator using the TAP-protocol.
Example:
Opwd1: nFYgu8
Opwd2: 247936
pxxx – X3 parameter set
X.3 PAD command set only:
show setting of one X3 parameter.
Change X3 parameter by entering the new value.
p001
show setting of X3 parameter 1
p001=1 set X3 parameter 1 to 1