V1 – display last connection statistics – Westermo ID-90 User Manual
Page 36
36
6607-2204
AT&V1 – Displays the actual configuration of extended AT
command setting
cm
g711law: 0-Automatic
alarm
OpNumber1: 00491722278000
OpNumber2: 00491712521002
OpNumber3: 02403745101041
OpNumber4:
message1: SMS via D2 Germany
message2: SMS via D1 Germany
message3: Telia X31/X25 SMS
message4: Plain test msg.
recno1: 01725555555
recno2: 01711234567
recno3: 0046123456789
recno4: 004616987654321
mtype1: 0-SMS (UCP)
mtype2: 2-SMS (TAP)
mtype3: 0-SMS (UCP)
mtype4: 1-Text
TransNo: 00461661200
trigcnd1: 1-Break Cond.
trigcnd2: 2-Make Cond.
trigcnd3: 1-Break Cond.
trigcnd4: 1-Break Cond.
maxretries: 0 opwd1:
opwd2: PG1
opwd3:
opwd4:
alprot1: 0-X.75
alprot2: 0-X.75
alprot3: 1-X.31D
alprot4: 0-X.75
remote
rmsn: *
rsub: *
rpwd:
trc
trcdln: 256
trcmsk: 0000000300020500
cim
cmds: 0-ATcmd
dialci
isdn: 0-DSS1 ptp: 0-P-MP
dial
msn: *
sub: *
prot: 10-X.75 SLP
cha: 0
chatol: 0
bsize: 2048
dte: 0
k: 7
br: 0-adaptive
dbits: 8
sbits: 1 prty: 0-none
cdtr: 2-control
cdcd: 1-connected
ccts: 1-on
cdsr: 0-on
flc: 3-RTS/CTS
idle: 0
svcio: 1
x31rr: 0
cmlp: 0
chappwd:
v25bisout: 0
dabort: 1
!&V1 – Display Last Connection Statistics
Displays the last connection statistics in the following format (shown with typical results):
TERMINATION REASON.......... LOCAL REQUEST
LAST TX rate................ 26400 BIT/S
HIGHEST TX rate............. 26400 BIT/S
LAST RX rate................ 49333 BIT/S
HIGHEST RX rate............. 49333 BIT/S
PROTOCOL.................... LAPM
COMPRESSION................. V42Bis
Line QUALITY................ 038
Rx LEVEL.................... 015
Highest Rx State............ 67
Highest TX State............ 67
EQM Sum..................... 00B4
Min Distance................ 0000
RBS Pattern................. 00
Rate Drop................... 00
Digital Loss................ 2000
Local Rtrn Count............ 00
Remote Rtrn Count........... 00
Flex 9481814347C4
RBS Pattern: Shows which bits are being robbed in the least significant 6 bytes, e.g., 03 indicates 2 robbed bits in
bit positions 0 and 1.
Digital Loss: Shows if a pad was encountered and if so, what was the digital loss. 2000 means 0dB.
90