Westermo ID-90 - Manual (Page 43)

43 6607-2204
1 Enable extended services (-K1)
2 Enable extended services (-K2)
Bit 2 Reserved
Bits 3–5 Break Handling (\Kn)
0\K0
1
\K1
2 \K2
3 \K3
4 \K4
5 \K5 (default)
Bits 6–7 Reserved.
S41 – General Bit Mapped Options Status
Only valid with analogue modem option.
S41 indicates the status of command options.
Default: 195 (C3h) (1100011b)
Bits 0–1 Compression selection (%Cn)
0Disabled (%C0 )
1 MNP 5 (%C1)
2 V.42 bis (%C2)
3 MNP 5 and V.42 bis (%C3) (default)
Bits 2, 6 Auto retrain and fallback/fall forward (%En)
0 0 Retrain and fallback/fall forward disabled (%E0)
0 1 Retrain enabled (%E1)
1 0 Fallback/fall forward enabled (%E2) (default)
Bits 3–5, 7 Reserved.
S46 – Data Compression Control
Only valid with analogue modem option
S46 controls selection of compression. The following actions are executed for the given
values:
S46
136
Execute error correction protocol with no compression.
138 Execute error correction protocol with compression. (default)
90
90