Westermo ID-90 - Manual (Page 53)

53 6607-2204
10 Screen Line Width
not suppported
11 Local baudrate (Read only)
Displays actual used baudrate on asynchronous line.
1: 1 200 bit/s
2: 2 400 bit/s
3: 4 800 bit/s
4: 9 600 bit/s
5: 19 200 bit/s
6: 38 400 bit/s
7: 57 600 bit/s
8: 115 200 bit/s
12 Local flow control (Read only)
Handles and displays used flow control on asynchronous line.
0: no flow control
3: flow control RTS / CTS
4: flow control XON / XOFF
Extended Parameters 13 through 24
13 Automatic Line Feed
Defines, whether the PAD should automatically append a line feed follow-
ing a carriage return and – if so – in which case. See parameter 126
also.
Valid Parameter Values:
0
No added
1 When receiving data from the remote party add a automatically
after each received.
2 Add a automatically after each received from the local key-
board.
4 By each echo of a to the screen, also send a .
Note: This parameter is interpreted bit-wise, thus any combination of the above
listed values can be combined to form a sum of the desired values
14 Line Feed Fill Characters
Defines, whether fill characters should be sent following a line
feed .
Valid Parameter Values:
0
No fill characters after a
n Following a on the screen, append n fill characters . n is
an integer in the range from 1 to 255.