Westermo ID-90 - Manual (Page 35)

35 6607-2204
&R – CTS control
Selects the behaviour of the CTS control line from the ID-90.
AT&R0ID-90 control line CTS is following all changes of RTS
AT&R1 CTS is always ON (default)
AT&R2 CTS follows DTR
#R – Handle incoming calls
Selects the behaviour of the ID-90 when an incoming call is received.
AT#R0 Disable automatic reject of all incoming calls (default)
AT#R1 Enable automatic reject of all incoming calls
S – Display and set internal S register
ATSnn? Show actual values (decimal) of selected register nn
ATSnn=xx Set selected register nn to the decimal value xx.
&S – DSR control
Selects the behaviour of the DSR control line from the ID-90.
AT&S0 ID-90 control line DSR is always ON (default)
AT&S1 DSR ON indicates ISDN connection is established and synchronized
V – Result format
ATV0Result is presented as numbers (followed by <
↵
>)
ATV1 Result is presented as text (default)
ATV2 Result is presented as text
RING and CONNECT including ISDN address,
all others include error causes
&V – Display configuration
AT&V0Displays the actual configuration of AT command setting including stored ISDN
numbers
at&v
ACTIVE PROFILE:
B10 E1 Q0 V1 W0 X4 &C1 &D2 &K3 &R1 &S0 %B0 #R0
S00:001 S01:000 S02:043 S03:013 S04:010 S05:008 S06:003 S07:040 S09:001
S16:0000H S90:
TELEPHONE NUMBERS:
NO1:
NO2:
NO3:
OK