Westermo GD-01 - Manual (Page 98)

98 6196-2220
+CRLP – Radio link protocol parameters
Description:
This command allows the radio link protocol parameters used for non transparent data
transmission to be changed.
Syntax:
AT+CRLP=,,,,
Command example Possible responses Note
AT+CRLP=? +CRLP: (0-61),(0-61), Test command
(40-255),(1,255),(0,1)
OK
AT+CRLP=61,61,48,6,0 OK Set new parameters
AT+CRLP? AT+CRLP: 61,61,48,6,0 Current values
Defined values:
This command accepts 5 parameters.
0-61: Down window size, (default is 61),
0-61: Up window size, (default is 61),
40-255: Acknowledgement timer in units of 10ms, (default is 48)
1-255: Retransmission attempts, (default is 6),
0-1:Version number. If V42bis is supported the version
is 1, If V42bis is not supported the version is 0
B A C K