Westermo GD-01 - Manual (Page 52)

52 6196-2220
+CSVM Set Voice Mail Number
Description:
This commands allows to set/get and enable/disable the voice mail number in memory.
Syntax:
AT+CSVM=[,[,]]
Command example Possible responses Note
AT+CSVM? +CSVM: 1,”660”,129 Get mail number, result:
OK voice mail number “660”
is activated
AT+CSVM=? +CSVM: (0-1),(129,145) Possible values?
OK
AT+CSVM=0,”888”,129 OK Disable Voice Mail num-
ber and change value to
“888”.
Defined values:
0: Disable the voice mail number
1: Enable the voice mail number
Phone number in ASCII format.
TON/NPI (Type of address byte in integer format).
NOTE: For the parameter, all values are allowed from 0 to 255, but the MSB
will be set to 1 in all cases (ex: a value of 17 will be written as 145).
B A C K