Westermo GD-01 - Manual (Page 15)

15 6196-2220
+CPAS – Phone activity status
Description:
This command returns the activity status of the mobile equipment.
Syntax:
AT+CPAS
Command example Possible responses Note
AT+CPAS +CPAS: Current activity status OK
Defined values:
may be one of the following parameters
0 ready (allow commands from TA/TE)
1 unavailable (does not allow commands)
2 unknown
3 ringing (ringer is active)
4 call in progress
5 asleep (low functionality)
+CMEE – Report Mobile Equipment Errors
Description:
This command disables or enables the use of the “+CME ERROR: ” or “+CMS
ERROR:” result code instead of simply “ERROR”.
See chapter ”error codes” for ”+CME ERROR” result codes description and ”+CMS
ERROR” result codes.
Syntax:
AT+CMEE=
may be one of the following parameters
0 Disable ME error reports, use only ”ERROR”
1 Enable long error reports, ”+CME ERROR xxx”
or ”+CMS ERROR xxx”
Command example Possible responses Note
AT+CMEE=0 OK Disable ME error reports,
use only «
ERROR »
AT+CMEE=1 OK Enable
”+CME ERROR: ”
or
”+CMS ERROR: ”
B A C K