Westermo GD-01 - Manual (Page 80)

80 6196-2220
+CLIR – Calling line identification restriction
Description:
This command allows control of the calling line identification restriction supplementary
service.
Syntax:
AT+CLIR=
Response Syntax:
+CLIR :, (for AT+CLIR ?)
Command example Possible responses Note
AT+CLIR=2 OK
AT+CLIR ? +CLIR :, Ask for current
OK functionality, result:
and as defined here-
below
Defined values:
Sets the line ID restriction for outgoing calls
0: Presentation indicator is used according to the subscription of the CLIR service
1: CLIR invocation
2: CLIR suppression
Shows the subscriber CLIR status in the network
0: CLIR not provisioned
1: CLIR provisioned in permanent mode
2: Unknown (no network...)
3: CLIR temporary mode presentation restricted
4: CLIR temporary mode presentation allowed.80
B A C K