Westermo GD-01 User Manual
Page 109
109
6196-2220
0:
Normal end of connection.
10:
Unspecified transmit phase A error.
20:
Unspecified transmit phase B error.
40:
Unspecified transmit phase C error.
50:
Unspecified transmit phase D error.
70:
Unspecified receive phase B error.
90:
Unspecified receive phase C error.
100:
Unspecified receive phase D error.
+FDT – Transmit Data
Description:
This command prefixes data transmission.
Syntax:
AT+FDT
+FDR – Receive Data
Description:
This command initiates data reception.
Syntax:
AT+FDR
+FET – Transmit page punctuation
Description:
This command punctuates page and document transmission after +FDT commands.
It indicates that the current page is complete, and whether or not there are additional
pages to be sent.
Syntax:
Command syntax: AT+FET=
Defined values:
0:
Another page next, same document
1:
Another document next
2:
No more pages or documents
3:
Another partial page next
4:
Another page, procedure interrupt
5:
Another document, procedure interrupt
6:
All done, procedure interrupt
The remote station should respond with +FPTS:
B A C K