Westermo GD-01 - Manual (Page 173)

173 6196-2220
Defined Values:
a numeric parameter which specifies a GPRS parameter :
0: ATTACH-STATUS (the ME don’t make automatically a GPRS attachment after
init)
1: PDP-INIT-STATUS (activate automatically some define PDP Contexts after init)
2: Set ACTIVABLE automatically after init a define PDP context
3: NAT
:
A numeric parameter that control the
0: Off
1: On
:
(PDP Context Identifier) a numeric parameter (1-32) which specifies a particular PDP
context definition.The parameter is local to the TE-MT interface and is used in other
PDP context-related commands.
Command example Possible responses Note
AT+WGPRS=2,1,3 OK –
AT+WGPRS=? +WGPRS: (0-3),(0-1),(0-4) –
OK
AT+WGPRS? +WGPRS: 0,0 –
+WGPRS: 1,0
+WGPRS: 2,1,1
+WGPRS: 2,0,2
+WGPRS: 2,0,3
+WGPRS: 2,0,4
+WGPRS: 3,1
OK
B A C K