Westermo GD-01 - Manual (Page 10)

10 6196-2220
General commands
+CGMI – Manufacturer identification
Description:
This command gives the GSM engine manufacturer identification.
Syntax:
AT+CGMI
Command example Possible responses Note
AT+CGMI WAVECOM MODEM Module manufacturer
OK
+CGMM – Request model identification
Description:
This command is used to get the supported frequency bands.With multi-band products
the response may be a combination of different bands.
Syntax:
AT+CGMM
Command example Possible responses Note
AT+CGMM MULTIBAND 900E 1800 Support of 900
OK and 1800 MHz
+CGMR – Request revision identification
Description:
This command is used to get the GSM engine software version.
Syntax:
AT+CGMR
Command example Possible responses Note
AT+CGMR 430a09gm.2D ... Software release 4.30
OK
B A C K