Westermo GD-01 User Manual
Page 73
73
6196-2220
+WCBM – Cell Broadcast Message Identifiers
Description:
This command is used to read the EF-CBMI SIM file. Remark:The EF-CBMI file
is not used with the +CSCB command.The application should read this file
(using AT+WCBM?) and combine the Message Identifiers with those required
by the application.
Syntax:
AT+WCBM=
Command example
Possible responses
Note
AT+WCBM=
OK
Write 4 messages
”10,100,1000,10000”
identifiers in EF-CBMI,
CBMIs are stored in
EF-CBMI
AT+WCBM?
+WCBM=”10,100,
Read the CBMIs in
1000,100000”
EF-CBMI. 4 CBMIs are
stored in EF-CBMI
+WMSC – Message status modification
Syntax:
AT+WMSC=
Defined values:
location number of the stored message (integer)
new status to be stored, as for +CMGL command:
PDU Mode Text Mode
0 “REC
UNREAD”
1 “REC
READ”
2 “STO
UNSENT”
3 “STO
SENT”
Possible responses:
OK
if the location is valid
+CMS ERROR: 321
if
+CMS ERROR: 302
if the new
NOTE 1: The accepted status changes are from READ to NOT READ and vice versa,
and from SENT to NOT SENT and vice versa. If all the parameters are
correct, the product overwrites the whole SMS in SIM. Only the first byte
(Status byte) is changed..
B A C K