Westermo GD-01 - Manual (Page 31)

31 6196-2220
string type; two byte location area code in hexadecimal format
(e.g. “00C3” equals 195 in decimal).
string type; two byte cell ID in hexadecimal format.
+WOPN – Read operator name
Description:
This specific command returns the operator name in alphanumeric format when given
the numeric format.
Syntax:
AT+WOPN=,
Response syntax:
+WOPN: ,
Command example Possible responses Note
AT+WOPN=? OK Test command
AT+WOPN=0,20801 +WOPN: 0,”Orange F” Give an operator
OK in numeric format,
alphanumeric
answer
AT+WOPN=0,99999 +CME ERROR: 22 Give a wrong operator,
not found
Defined values:
is the required format. Only long (0) and short (1) alphanumeric formats are supported.
is the operator in numeric format.
is the operator in long or short alphanumeric format
(see operator listing in the end of the manual.
B A C K