Westermo GD-01 - Manual (Page 37)

37 6196-2220
+CPINC – PIN remaining attempt number
Description:
This specific command is used to get the number of valid attempts for PIN1 (CHV1),
PIN2 (CHV2), PUK1 (UNBLOCK CHV1) and PUK2 (UNBLOCK CHV2) identifiers.
Syntax:
AT+CPINC
Response Syntax
+CPINC: ,,,
Command example Possible responses Note
AT+CPINC +CPINC: 2,3,10,10 Get the number of
attempts left, first CHV1
attempt was a failure
AT+CPINC? +CPINC: 2,3,10,10 Get current values, first
attempt was a failure
AT+CPINC=? OK Get possible values
Defined values:
,
are the attempts left for PIN1, PIN2 (0 = blocked, 3 max)
,
are the attempts left for PUK1, PUK2 (0 = blocked, 10 max)
For this to work, the card should be present at the time of initialization, otherwise an
error will be sent (+CME ERROR: 10).
B A C K