Westermo GD-01 - Manual (Page 53)

53 6196-2220
Short Messages commands
Parameters definition
The parameters below are used in the short message commands.
Destination Address, coded like GSM 03.40 TP-DA
Data Coding Scheme, coded like in document [5].
Discharge Time in string format: “yy/MM/dd,hh:mm:ss±zz”
(Year [00-99], Month [01-12], Day [01-31], Hour, Minute,
Second and Time Zone [quarters of an hour] )
First Octet, coded like SMS-SUBMIT first octet in
GSM 03.40, default value is 17 for SMS-SUBMIT
Place of storage in memory.
Text mode (+CMGF=1): number of characters PDU mode
(+CMGF=0): length of the TP data unit in octets
Memory used to list, read and delete messages
(+CMGL, +CMGR and +CMGD).
Memory used to write and send messages
(+CMGW, +CMSS).
CBM Message Identifier.
Message Reference.
Originator Address.
Protocol Identifier.
For SMS: GSM 04.11 SC address followed by GSM 03.40
TPDU in hexadecimal format, coded as specified in GSM
03.40 for CBS: GSM 03.41 TPDU in hexadecimal format
Recipient Address.
Service Center Address
Service Center Time Stamp in string format:
“yy/MM/dd,hh:mm:ss±zz”
(Year/Month/Day,Hour:Min:Seconds±TimeZone)
CBM Serial Number
Status of a SMS-STATUS-REPORT
Status of message in memory.
Type-of-Address of .
Type-of-Address of .
Type-of-Address of .
Number of message locations in .
Number of messages locations in
Total number of messages locations in .
Total number of messages locations in
Validity Period of the short message, default value is 167
B A C K