Westermo GD-01 - Manual (Page 119)

119 6196-2220
&S – Set DSR signal
Description:
This commands controls the Data Set Ready (DSR) signal.
Syntax:
AT&S
Command example Possible responses Note
AT&S0 OK DSR always on
AT&S1 OK DSR off in command
mode, DSR on in data
mode
O – Back to online mode
Description:
If a connection has been established and the ME is in command mode, this command
allows you to return to online data mode.
Syntax:
ATO
Command example Possible responses Note
ATO OK Return from offline mode
to online mode
Q – Result code suppression
Description:
This command determines whether the mobile equipment sends result codes or not
Syntax:
ATQ
Command example Possible responses Note
ATQ0 OK DCE transmits result
codes
ATQ1 (none) Result codes are
suppressed and not
transmitted
B A C K