Westermo GD-01 - Manual (Page 82)

82 6196-2220
+COLP – Connected line identification presentation
Description:
This command allows control of the connected line identification presentation
supplementary service – useful for call forwarding of the connected line.
Syntax:
AT+COLP=
Response syntax:
+COLP: , for AT+COLP?
+COLP: , [ ,, , ] after ATD command,
before OK or CONNECT
Command example Possible responses Note
AT+COLP=1 OK Activate COLP
AT+COLP? +COLP:1,1 Ask for current
OK functionality, COLP is
enabled and provisioned
ATD146290928; +COLP: or
”0146290928”,129,,,”JOE”
+COLP:“0146290800”,129,1,,, (UCS2 format)
”8000204212FFFF” Outgoing call,
OK connected outgoing line
number and name
presentation
AT+COLP=0 OK Deactivate COLP
Defined values:
Parameter sets/shows the result code presentation status in the TA
0: Disable
1: Enable
Parameter shows the subscriber COLP service status in the network
0: COLP not provisioned
1: COLP provisioned
2: Unknown (no network).
B A C K