Westermo GD-01 - Manual (Page 38)

38 6196-2220
+CLCK – Facility lock
Description:
This command is used by the application to lock, unlock or interrogate an ME or
network facility .
NOTE: Test SIM cards (with MCC=001 & MNC=01) doesn’t check “PS”, “PN”,
“PU”, “PP” and “PC” locks.
Syntax:
AT+CLCK= ,[,[,] ]
Response syntax:
+CLCK: [ , ]+CLCK: , [ ... ] ]
Command example Possible responses Note
AT+CLCK=”SC”,1,1234 OK Enable PIN,
PIN was correct
AT+CLCK? +CLCK:(“PS”,0),(“SC”,0), Read PIN status,
(“FD”,0),(“PN“,0),(“PU“,0), PIN is enabled, no SIM
(“PP“,0),(“PC“,0)
lock, no network lock,
OK no information on Call
barring (no longer
supported in GSM 07.07)
AT+CLCK=”SC”,0,5555 +CME ERROR: 16 Disable PIN, PIN was
wrong
AT+CPIN=1234 OK Enter PIN, PIN was good
AT+CLCK=? +CLCK:(“PS”,”SC”,”AO”, Request supported facili-
”OI”,”OX”,”AI”,”IR”, ties, supported facilities
”AB”, ”AC”, ”FD”,"PN",
"PU","PP",”PN”)
OK
AT+CLCK=”PN”,1,12345678 OK Activate network lock,
Network lock activated
AT+CLCK=”AO”,1,1234,2 OK Activate all outgoing calls
barring for data calls
Call barring is activate
AT+CLCK=”AO”,2 +CLCK: 1,2 Query BAOC status,
OK BAOC activate for data
calls only
AT+CLCK=”SC”,0,0000 +CME ERROR: 521 Disable PIN, PIN deactiva-
tion is forbidden with this
SIM card.
B A C K