Westermo GD-01 - Manual (Page 64)

64 6196-2220
+CMGL – List message
Description:
This command allows the application to read stored messages, by indicating the type of
the message to read.The messages are read from the memory selected by the +CPMS
command.
Syntax:
AT+CMGL=
Response syntax for text mode:
+CMGL: ,,[,], [, , ]
(for SMS-DELIVER and SMS-SUBMIT, may be followed by other
+CMGL:...)
+CMGL: ,,,,[],[],,
Response syntax for PDU mode:
+CMGL: ,, [],
(for SMS-DELIVER, SMS-SUBMIT and SMS-STATUS-REPORT, may be followed by other
+CMGL:...)
Command example Possible responses Note
AT+CMGL=“REC UNREAD” +CMGL: 1,”REC UNREAD”, List unread messages in
”0146290800”, text mode, 2 messages
are unread, these
Unread message! messages will then have
+CMGL: 3, their status changed to
”REC UNREAD”, “REC READ” (+CSDH:0)
“46290800”,
OK
AT+CMGL=”REC READ” +CMGL: 2,”REC READ”, List read messages in text
”0146290800”, mode
OK
AT+CMGL=”STO SENT” OK List stored and sent
messages in text
mode, result: no message
found
AT+CMGL=1 +CMGL: 1,1,,26 List read messages in
07913366003000F3040 PDU mode
B913366920547F4
B913366920547F4
001300119041253040074
1AA8E5A9C5201
OK
B A C K