Westermo GD-01 - Manual (Page 191)

191 6196-2220
GSM sequences list
In accordance with GSM 02.30, the product supports the following GSM sequences,
which can be used through the ATD and the +CKPD commands.
Security
**04*OLDPIN*NEWPIN*NEWPIN# Change PIN code
**042*OLDPIN2*NEWPIN2*NEWPIN2# Change PIN2 code
**05*PUK*NEWPIN*NEWPIN# Unlock PIN code
**052*PUK2*NEWPIN2*NEWPIN2# Unlock PIN2 code
*#06# Show the IMEI number
Call forwarding
Activate : *SC#
Register and activate **SC*PhoneNumber# or
**SC*PhoneNumber*BS# or
**SC*PhoneNumber*[BS]*T#
Check status
*#SC# or *#SC**BS#
Deactivate #SC#
Unregistered and deactivate
##SC# or ##SC**BS#
The Service codes (SC) are:
002 all call forwarding
004 all conditional call forwarding
21 call forwarding unconditional
61 call forwarding on no answer
62 call forwarding on not reachable
67 call busy
The Network service codes (BS) are:
No code All tele and bearer services
10 All teleservices
11 Telephony
12
All data teleservices
13 Fax services
16 Short Message Services
19 All teleservices except SMS.200
20 All bearer services
21 All asynchronous services
22 All synchronous services
24 All data circuit synchronous
25 All data circuit asynchronous
26 All dedicated packet access
27 All dedicated PAD access
The no reply condition timer (T), is only used for SC = 002, 004 or 61.
B A C K